AP Physics C: Mechanics · Unit 7 lecture · Part 6 of 10 · 8 min

7.3 Amplitude and phase from the startWhere it starts decides A and φ

Mr. Thompkins
So far, things were released from rest at the end of the motion, so the amplitude was obvious. Real life is messier: a block is somewhere in the middle and someone gives it a push. Here's how to find A and φ from that starting moment.

Start from $x(t) = A\cos(\omega t + \phi)$ and $v(t) = -A\omega\sin(\omega t + \phi)$. At $t = 0$ they give $x_0 = A\cos\phi$ and $v_0 = -A\omega\sin\phi$. Two equations, two unknowns. Square and add them, using $\cos^2 + \sin^2 = 1$: $x_0^2 + \left(\frac{v_0}{\omega}\right)^2 = A^2$. So $A = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2}$. Then φ is the angle with $\cos\phi = \frac{x_0}{A}$ and $\sin\phi = -\frac{v_0}{\omega A}$.

?Wait, why does $\cos^2\theta + \sin^2\theta = 1$?
On a circle of radius 1, the point at angle θ has coordinates $(\cos\theta, \sin\theta)$, and by the Pythagorean theorem its distance from the center squared is $\cos^2\theta + \sin^2\theta = 1$. It's the tool that removes the angle from two equations.

The same identity gives the speed at any position, with no time needed. From $x = A\cos(\omega t + \phi)$ and $v = -A\omega\sin(\omega t + \phi)$: $\left(\frac{x}{A}\right)^2 + \left(\frac{v}{A\omega}\right)^2 = 1$, so $v = \pm\omega\sqrt{A^2 - x^2}$. The sign depends on which way it's going. At $x = 0$ this is $A\omega$, the maximum; at $x = \pm A$ it's zero.

Amplitude and phase from a push
A 0.40 kg block on a 10 N/m spring is at $x_0 = -0.030$ m and moving at $v_0 = +0.20$ m/s at $t = 0$. (a) Find ω and the amplitude. (b) Find the phase constant and write x(t). (c) When does it first reach $x = +A$?
0x₀AA = 0.050 mφ = −2.21 rad (−127°)x₀ = −0.030 mmoving toward +xpoint turns counterclockwise
  1. (a) $\omega = \sqrt{\frac{k}{m}} = \sqrt{\frac{10}{0.40}} = 5.0\ \text{rad/s}$, and $A = \sqrt{x_0^2 + \left(\frac{v_0}{\omega}\right)^2} = \sqrt{(0.030)^2 + (0.040)^2} = 0.050\ \text{m}$.
    Why?
    The push carries it past where it is now, so the amplitude is bigger than |x₀|. Here it is 5.0 cm, not 3.0 cm.
  2. (b) $\cos\phi = \frac{x_0}{A} = -0.60$ and $\sin\phi = -\frac{v_0}{\omega A} = -\frac{0.20}{0.25} = -0.80$. Both negative puts φ in the third quadrant: $\phi = -2.21$ rad (that is, −127°).
    Why?
    Don't trust $\cos^{-1}(-0.60)$ alone: it returns +2.21 rad, which has the wrong sign of sine. Check both conditions, or picture the reference circle.
  3. So $x(t) = 0.050\cos(5.0t - 2.21)$. Check at t = 0: $0.050\cos(-2.21) = -0.030$ m, and $v(0) = -0.25\sin(-2.21) = +0.20$ m/s.
    Why?
    Always plug t = 0 back in. It catches the quadrant mistake instantly.
  4. (c) It is at +A when the phase is zero: $5.0t - 2.21 = 0$, so $t = 0.44$ s.

Answer: (a) ω = 5.0 rad/s, A = 0.050 m. (b) φ ≈ −2.21 rad, $x(t) = 0.050\cos(5.0t - 2.21)$. (c) t ≈ 0.44 s.

Stuck? Get a hint
  1. A comes from $x_0^2 + (v_0/\omega)^2 = A^2$.
  2. For φ you need both $\cos\phi = x_0/A$ and $\sin\phi = -v_0/(\omega A)$. Which quadrant has both negative?
  3. Check your x(t) by plugging in t = 0.
Pause and think
Same block and spring, same starting position, but the push is in the other direction: v₀ = −0.20 m/s. What changes, A or φ?
I thought about it. Show me
A stays 0.050 m, because it depends on $v_0^2$. φ changes sign: $\sin\phi = +0.80$ now, so $\phi = +2.21$ rad. On the reference circle, the point starts in the upper left instead of the lower left, so the shadow moves toward −x first.
?Wait, where is the reference circle point when the shadow moves right?
The point turns counterclockwise. On the bottom half of the circle it moves to the right, so the shadow moves toward +x. On the top half it moves to the left. So a positive starting velocity puts the starting point on the bottom half, which means a negative φ.
Check yourself
An object in SHM with amplitude A and maximum speed $v_{max}$ is at x = A/2. What is its speed?
  1. A$\tfrac12 v_{max}$
  2. B$\tfrac{\sqrt3}{2}v_{max}$
  3. C$\tfrac34 v_{max}$
  4. D$\tfrac14 v_{max}$
Show the answer

B. $v = \omega\sqrt{A^2 - x^2} = \omega\sqrt{A^2 - A^2/4} = \frac{\sqrt3}{2}A\omega \approx 0.87\,v_{max}$. The trap $\tfrac12 v_{max}$ assumes speed falls off in a straight line with x. It doesn't: the block is still moving fast halfway out.

  • From the start: $A = \sqrt{x_0^2 + (v_0/\omega)^2}$, $\cos\phi = \frac{x_0}{A}$, $\sin\phi = -\frac{v_0}{\omega A}$. Check the quadrant.
  • Speed at a position: $v = \omega\sqrt{A^2 - x^2}$.
  • Plug t = 0 back into your x(t) and v(t) to check them.