7.1 Defining simple harmonic motionA force that always pulls back

Start with a block on a frictionless floor, attached to a spring. Pull it to the side and let go. It slides back, overshoots, slows down, stops, comes back, and keeps going forever (with no friction). The spot where the spring is relaxed, where the block would sit happily at rest, is called the equilibrium position. We put $x = 0$ there.
?Wait, what is Hooke's law again?
The key feature is the shape of the force. A force that always points back toward equilibrium is a restoring force. When its size is proportional to the displacement, $F = -kx$, the motion is called simple harmonic motion, or SHM. Proportional matters. Twice as far out means twice the pull back.
Now apply Newton's second law: $ma = -kx$. Acceleration is the second derivative of position, so $m\frac{d^2x}{dt^2} = -kx$, or $\frac{d^2x}{dt^2} = -\frac{k}{m}x$. Physicists give the constant a name: $\omega^2 = \frac{k}{m}$. Then the equation of SHM is $\frac{d^2x}{dt^2} = -\omega^2x$.
That's the definition the exam uses. Any system whose equation of motion can be written as $\frac{d^2x}{dt^2} = -(\text{positive constant})\,x$ is in simple harmonic motion, and the constant is $\omega^2$. It doesn't matter if x is a position, an angle or anything else. Recognize the form and you can read off ω, and from ω, the period.
?Wait, what are the first and second derivatives of position?
I thought about it. Show me
- (a) Newton's second law: $m\frac{d^2x}{dt^2} = -18x$, so $\frac{d^2x}{dt^2} = -\frac{18}{0.50}x = -36x$.
Why?
Always get the equation into the form "second derivative equals minus a constant times x". That form is the proof. - It has the SHM form with $\omega^2 = 36\ \text{s}^{-2}$, so $\omega = 6.0\ \text{rad/s}$ and $T = \frac{2\pi}{\omega} = \frac{2\pi}{6.0} = 1.05\ \text{s}$.
- (b) Rewrite: $\frac{d^2x}{dt^2} = -4x + 8 = -4(x - 2)$.
Why?
Factor out the coefficient of x. What is left inside the parentheses tells you where the force is zero. - Let $u = x - 2$. Since $\frac{d^2u}{dt^2} = \frac{d^2x}{dt^2}$, this is $\frac{d^2u}{dt^2} = -4u$: SHM about $x = 2$ m, with $\omega = 2.0\ \text{rad/s}$ and $T = \pi \approx 3.14\ \text{s}$.
Why?
A constant term only shifts the equilibrium point. You will see the same thing with a vertical spring, where gravity is the constant.
Answer: (a) SHM with ω = 6.0 rad/s and T ≈ 1.05 s. (b) Yes: SHM about x = 2.0 m with ω = 2.0 rad/s and T = π s.
Stuck? Get a hint
- Divide Newton's second law by m to get $\ddot x$ alone on the left.
- For (b), write $-4x + 8$ as $-4(\ldots)$.
- Compare with $\ddot x = -\omega^2 x$: the constant is $\omega^2$, not ω.
- A$a = -25x$
- B$a = -25x^2$
- C$a = 25x$
- D$a = -25$
Show the answer
A. Only $a = -25x$ has acceleration proportional to displacement and opposite to it, with $\omega = 5$ rad/s. $a = 25x$ pushes away from equilibrium (it runs away instead of oscillating), $a = -25x^2$ isn't proportional to x, and $a = -25$ is a constant acceleration, like the bouncing ball.
- SHM: a restoring force proportional to displacement, $F = -kx$.
- The SHM equation: $\frac{d^2x}{dt^2} = -\omega^2x$. For a spring, $\omega = \sqrt{k/m}$.
- At the ends: speed zero, force and acceleration largest. At equilibrium: force zero, speed largest.
- A constant added to the equation just shifts the equilibrium position.