3.2 WorkWork: force along the motion

For a constant force and a straight-line displacement, the work is the dot product of the force and the displacement:
$$W = \vec F\cdot\Delta\vec r = F\,\Delta r\cos\theta$$
where $\theta$ is the angle between the force and the displacement. Only the part of the force along the motion counts. In general, when the force or direction changes along the path, you add up tiny pieces: $W = \int\vec F\cdot d\vec r$.
?Wait, what's a dot product?
The sign of work is the sign of $\cos\theta$. A force with a part along the motion does positive work: it gives the object energy. A force with a part against the motion, like kinetic friction, does negative work: it takes energy away. A force perpendicular to the motion, like the normal force on a sliding box or gravity on something moving sideways, does zero work.
- Tension: $W_T = (50)(12)\cos 25° = 544\ \text{J}$.
Why?
The angle between the rope and the displacement is 25°. - Normal force: $F_N = mg - T\sin 25° = 147 - 21.1 = 125.9\ \text{N}$. Friction: $f_k = (0.15)(125.9) = 18.9\ \text{N}$, so $W_f = -(18.9)(12) = -227\ \text{J}$.
Why?
The rope lifts a little, so the normal force is less than mg. Friction points backward, θ = 180°, so cos θ = −1. - Gravity and the normal force are perpendicular to the motion: $W = 0$ for each.
- (b) $W_{net} = 544 - 227 + 0 + 0 = 317\ \text{J}$.
Why?
Work is a scalar, so the net work is just the sum of the works. No components needed. - (c) Work-energy theorem: $\frac12 mv_f^2 = \frac12 mv_i^2 + W_{net} = \frac12(15)(1.0)^2 + 317 = 325\ \text{J}$, so $v_f = \sqrt{\frac{2(325)}{15}} = 6.6\ \text{m/s}$.
Why?
No acceleration, no time, no kinematics. The energy method skips straight to the speed.
Answer: (a) Tension +544 J, friction −227 J, gravity 0, normal 0. (b) +317 J (c) about 6.6 m/s
Stuck? Get a hint
- W = F d cos θ for each force, with θ between that force and the displacement.
- For friction, find $F_N$ from the vertical balance: mg − T sin 25°.
- Then $K_f$ = $K_i$ + $W_{net}$.
The work-energy theorem
Here's why net work and kinetic energy are tied together, and it's a short proof you should be able to reproduce. Start from the second law in one dimension, $F_{net} = m\frac{dv}{dt}$, and integrate it over the displacement:
$$W_{net} = \int F_{net}\,dx = \int m\frac{dv}{dt}\,dx = \int m\,v\,dv = \tfrac12 mv_f^2 - \tfrac12 mv_i^2 = \Delta K$$
?Wait, how did $\frac{dv}{dt}\,dx$ turn into $v\,dv$?
I thought about it. Show me
- A2 J
- B10 J
- C11 J
- D−4 J
Show the answer
A. $W = F_x\Delta x + F_y\Delta y = (3)(2) + (4)(-1) = 2\ \text{J}$. Choice C multiplies the sizes, $5\times2.24 \approx 11$, as if the vectors were parallel. Choice B adds 6 and 4 and drops the sign of $\Delta y$. The dot product counts only the parts that line up, with their signs.
- $W = \int\vec F\cdot d\vec r$; for a constant force, $W = Fd\cos\theta$.
- Positive work adds energy, negative work removes it, perpendicular forces do none.
- Work-energy theorem: $W_{net} = \Delta K$, proved from $F = m\frac{dv}{dt}$.
- Net work is the sum of the works of every force: just add scalars.