AP Physics C: Mechanics · Unit 2 lecture · Part 4 of 11 · 11 min

2.5 Newton's second lawNet force makes acceleration

Mr. Thompkins
Now the law that does the real work. Unit 1 asked how things move. This one tells you why: net force causes acceleration, in a precise amount.

Newton's second law: $\sum\vec F = m\vec a$. The acceleration points the same way as the net force, and its size is the net force divided by the mass. In Physics C we often write it with a derivative, $\sum F = m\frac{dv}{dt}$, which is the form you'll need whenever a force changes. It's a vector equation, so apply it one direction at a time: $\sum F_x = ma_x$ and $\sum F_y = ma_y$.

The routine, every time: (1) choose the system, (2) draw its FBD, (3) choose axes, ideally with one along the acceleration, (4) write $\sum F = ma$ for each axis, (5) solve. Steps 2 and 4 are where the points live on an FRQ.

Connected objects

3.0 kg2.0 kgaafrictionless table
A 3.0 kg block on a frictionless table, tied over a light pulley to a hanging 2.0 kg block. They share one acceleration.
?Wait, why is the tension the same on both sides of the pulley?
For an ideal setup, the string has negligible mass and the pulley is light and frictionless. A massless string can't have a net force on it (it would get infinite acceleration), so it pulls with the same tension everywhere along its length. A heavy pulley changes this, and that's a Unit 5 problem.
System first, then split
In the figure, the 3.0 kg block slides on a frictionless table and the 2.0 kg block hangs. Find (a) the acceleration and (b) the tension in the string.
  1. (a) Treat both blocks as one system moving along the string. The only external force that drives it along the string is the hanging block's weight, $(2.0)(9.8) = 19.6\ \text{N}$.
    Why?
    Tension is internal to the two-block system, so it drops out. The table block's weight is balanced by the normal force.
  2. $a = \frac{19.6}{3.0 + 2.0} = 3.92\ \text{m/s}^2$.
    Why?
    The whole 5.0 kg has to be accelerated by that one driving force.
  3. (b) Now isolate the table block. The only horizontal force on it is tension: $T = m_1a = (3.0)(3.92) = 11.8\ \text{N}$.
    Why?
    To find an internal force, you have to pick a system where it is external. One block alone does that.
  4. Check with the hanging block: $m_2g - T = m_2a$ gives $T = (2.0)(9.8 - 3.92) = 11.8\ \text{N}$. Same answer.
    Why?
    The tension is less than the hanging weight. If it were equal, the hanging block would not accelerate.

Answer: (a) 3.92 m/s² (b) 11.8 N

Stuck? Get a hint
  1. Pick both blocks as the system. What external force drives it along the string?
  2. Divide by the total mass, 5.0 kg.
  3. For tension, apply ΣF = ma to the table block alone.

Inclines

$mg$$F_N = mg\cos 25°$
A block on a frictionless 25° incline. Tilt the axes: the normal force balances mg cos 25°, and mg sin 25° is left over along the slope.

On an incline, put your x-axis along the slope. Then gravity splits into $mg\sin\theta$ down the slope and $mg\cos\theta$ into the surface. The normal force balances the second part, so on a frictionless slope $a = g\sin\theta$. At 25°, that's $9.8\sin 25° = 4.14\ \text{m/s}^2$.

Pause and think
A 60 kg student stands on a bathroom scale in an elevator that's accelerating upward at 2.0 m/s². What does the scale read?
I thought about it. Show me
The scale reads the normal force. Up positive: $F_N - mg = ma$, so $F_N = m(g + a) = 60(9.8 + 2.0) = 708\ \text{N}$, more than her weight of 588 N. That's her apparent weight. Accelerating down would make it read less, and in free fall it would read zero.

When the force changes with time

Here's the Physics C part. If a force depends on time, the acceleration does too, and you integrate exactly like Unit 1. A 2.0 kg cart starts from rest on a frictionless track and is pushed by $F = 6t$ (newtons, seconds). Then $a = \frac{F}{m} = 3t$, so $v = \int_0^t 3t\,dt = 1.5t^2$, and $x = \int_0^t 1.5t^2\,dt = 0.5t^3$. At $t = 2.0\ \text{s}$: $v = 6.0\ \text{m/s}$ and $x = 4.0\ \text{m}$.

00.511.52036912t (s)F (N)area: 12 N·sF = 6t
The push grows steadily. Its area, 12 N·s, divided by the 2.0 kg mass, gives the 6.0 m/s gained.
00.511.5201234567t (s)v (m/s)$v = 1.5t^2$6.0 m/s
The velocity curves upward because the acceleration keeps growing.
?Wait, can I use $v = v_0 + at$ for the cart?
No. That equation assumes a constant acceleration, and here $a = 3t$ changes every instant. Plugging in $a(2) = 6$ would give $v = 12\ \text{m/s}$, twice too big. Integrate $a(t)$ instead, just as in Unit 1.
Check yourself
An Atwood machine hangs a 5.0 kg block and a 3.0 kg block over a light, frictionless pulley. What is the tension in the string?
  1. A29.4 N
  2. B36.8 N
  3. C39.2 N
  4. D49.0 N
Show the answer

B. System: $a = \frac{(5.0 - 3.0)(9.8)}{8.0} = 2.45\ \text{m/s}^2$. The 3.0 kg block accelerates up: $T - 29.4 = (3.0)(2.45)$, so $T = 36.8\ \text{N}$. Choice A is the light block's weight, which would mean no acceleration. Choice D is the heavy block's weight. The tension sits between the two weights.

  • $\sum\vec F = m\vec a$, one axis at a time. With changing forces, $\sum F = m\frac{dv}{dt}$ and integrate.
  • Connected objects: the whole system gives a; one object alone gives the tension.
  • Frictionless incline: $a = g\sin\theta$, $F_N = mg\cos\theta$.
  • Apparent weight is the normal force: $m(g + a)$ accelerating up, $m(g - a)$ accelerating down.