AP Physics C: E&M · Unit 9 lecture · Part 10 of 10 · 9 min
Unit 9 wrap-upPut it together
Mr. Thompkins
You've built a second language for electrostatics. Field and force tell you which way things get pushed. Potential and energy tell you how fast things end up going. The best physicists switch between them without thinking. Let's tie it together.
Field and force (vectors)
$E = kq/r^2$, $F = qE$
Add by components
Best for: directions, accelerations, equilibrium
Get it from V: $E_x = -dV/dx$
Potential and energy (scalars)
$V = kq/r$, $U = qV$
Add as signed numbers
Best for: speeds, work, closest approach
Get it from E: $\Delta V = -\int\vec E\cdot d\vec r$
?Wait, U or V, which one has the charge in it?
V is a property of a place, set up by the source charges, in volts. U is the energy of a particular charge placed there (or of a system of charges), in joules: $U = qV$. Change the test charge and U changes; V doesn't.
Every road in electrostatics. Charges give you E (Coulomb or Gauss) or V (integrate k dq/r). E and V convert into each other with an integral or a derivative. Forces give directions; energies give speeds.?Wait, when do I need momentum conservation too?
When more than one object is free to move. If one charge is fixed (held in place, or much heavier), energy conservation alone gives the speed. If both move, add $m_1v_1 = m_2v_2$ (starting from rest) so you have two equations for two speeds.
The calculus links run both ways. Integrate the field along a path to get the potential difference. Differentiate the potential to get the field. The integral version is how you get V from Gauss's law results; the derivative version is how you read V graphs and how you get E from a V that was easier to integrate.
Pause and think
Two isolated systems, both with total charge zero: system 1 is a $+q$ and a $-q$ close together, system 2 has the charges far apart. Which has more potential energy?
I thought about it. Show me
System 2. U is negative for opposite charges, and closer means more negative. The far-apart pair has U closer to zero, so it has more energy. You had to do positive work to pull them apart.
Traps that cost points
✕ Treating potential as a vector and using components.
✓ Potential is a scalar. Add kq/r with signs, using only distances.
✕ Using 1/r² for U or V.
✓ U and V go as 1/r. Only the force and field go as 1/r².
✕ Assuming E = 0 means V = 0 (or the reverse).
✓ E is the slope of V. One can be zero while the other isn't.
✕ Dropping the sign of the charge in ΔU = qΔV.
✓ Electrons: q = −e. They gain kinetic energy moving to higher V.
✕ Counting each pair twice in a system's energy.
✓ N(N − 1)/2 pairs, each once.
✕ Forgetting the minus sign in E = −dV/dx or ΔV = −∫E·dr.
✓ Field points toward lower potential. Check the direction with a picture.
✕ Saying the potential energy belongs to one charge.
✓ U belongs to the system of interacting charges.
Key relationships for Unit 9
$U = \frac{kq_1q_2}{r}$
Potential energy of two point chargesSum over pairs for a system
$V = \frac{kq}{r}, \quad V = \int\frac{k\,dq}{r}$
Potential of chargesScalar sums and integrals
$\Delta U = q\Delta V$
Energy and potentialKeep the sign of q
$\Delta V = -\int_A^B\vec E\cdot d\vec r$
Potential from fieldUniform field: ΔV = −Ed
$E_x = -\frac{dV}{dx}$
Field from potentialNegative slope of V against x
$\Delta K = -q\Delta V$
Energy conservationOnly electric forces doing work
$1\ \text{eV} = 1.6 \times 10^{-19}\ \text{J}$
Electron voltEnergy of e through 1 V
FRQ strategy for Unit 9
Mathematical Routines: "derive the potential" means start from V = ∫k dq/r or ΔV = −∫E·dr, show dq or the field you integrate, set limits, and keep symbols until the end.
Translation Between Representations: from a graph of V(x), get E from the slope (with the minus sign); from E(x), get ΔV from the area. Sketches must match: where V is flat, E is zero.
For speeds and distances, use energy, not forces. Write $K_i$ + $U_i$ = $K_f$ + $U_f$ with every term, then solve.
Qualitative/Quantitative Translation: claim first (greater, less, equal), then the physics reason ("potential is a scalar, so the contributions add"), then connect to your equation.
Experimental Design and Analysis: linearize. If ½mv² = qΔV, graph v² against ΔV; the slope is 2q/m.
State your zero of potential when it matters ("V = 0 at infinity").
Mixed FRQ practice
Two small spheres are released from rest 0.10 m apart. Sphere 1 has mass 1.0 g and charge $+2.0\ \mu$C; sphere 2 has mass 3.0 g and charge $+4.0\ \mu$C. Only the electric force acts. (a) Find the initial potential energy of the system. (b) Find the speed of each sphere when they are very far apart. (c) Explain why sphere 1 ends up faster.
(c) The forces on the two spheres are equal and opposite (Newton's third law), so they get equal and opposite momenta. With one third the mass, sphere 1 must have three times the speed. The bigger charge on sphere 2 doesn't matter, because the forces are equal anyway.
Answer: (a) 0.72 J. (b) $v_1 \approx 33$ m/s, $v_2 \approx 11$ m/s. (c) Equal and opposite momenta, and sphere 1 has less mass.
Stuck? Get a hint
U = kq₁q₂/r at the start, and zero far apart.
Momentum starts at zero, so m₁v₁ = m₂v₂.
Substitute v₁ = 3v₂ into the energy equation.
Check yourself
A fixed ring of radius a carries charge Q spread uniformly. A small particle of mass m and charge q (same sign as Q) is released from rest on the ring's axis, a distance a from its center, and is pushed away along the axis. What is its speed very far away?
A$\sqrt{\frac{2kqQ}{ma}}$
B$\sqrt{\frac{2kqQ}{\sqrt2\,ma}}$
C$\sqrt{\frac{kqQ}{ma}}$
D$\sqrt{\frac{2kqQ}{2ma}}$
Show the answer
B. At $z = a$, the distance to every piece is $\sqrt{a^2 + a^2} = \sqrt2\,a$, so $U_i = \frac{kqQ}{\sqrt2\,a}$. All of it becomes kinetic energy: $v = \sqrt{\frac{2kqQ}{\sqrt2\,ma}}$. The first choice uses the distance to the center instead of to the ring.
Check yourself
The potential in a region is V(x) = 10 − 5x (volts, meters). Which is true?
AThe field is 5 V/m in −x.
BThe field is 5 V/m in +x.
CThe field is 10 V/m in +x.
DThe field is zero where V = 0.
Show the answer
B. $E_x = -dV/dx = +5$ V/m, so 5 V/m in $+x$, toward lower potential (V decreases as x increases). The last choice confuses the value of V with its slope.
Mr. Thompkins
That's Unit 9. Go take the Unit 9 practice set, and when one stumps you, come back to that section's recall cards. Next up, Unit 10: conductors and capacitors, where everything you learned about potential gets put to work storing charge and energy.