AP Physics C: E&M · Unit 9 lecture · Part 3 of 10 · 8 min

9.1 Electric potential energy: force from energyReading a potential energy graph

Mr. Thompkins
Here's a skill that carries over straight from Mechanics: reading a graph of potential energy. Hand me U(x), and I can tell you the force at every point, where the charge speeds up, where it turns around and where it can sit still.

Since $\Delta U = -W$, a small step dx along x changes U by $dU = -F_x\,dx$. So the force is the negative slope of the potential energy curve:

$$F_x = -\frac{dU}{dx}$$

?Wait, how did this work for a ball on a hill?
Gravitational U = mgh has the shape of the hill. A ball always gets pushed downhill, toward lower U, and the steeper the hill, the bigger the push. At the bottom of a valley the slope is zero, so the force is zero: an equilibrium. The same reading works for any potential energy graph.

Read a U(x) graph like a landscape. Where the curve slopes down to the right, the force points right ($+x$). Where it slopes up to the right, the force points left. A minimum is a stable equilibrium: nudge the charge and the force pushes it back. A maximum is an unstable equilibrium: nudge it and it runs away.

Now add the total energy E as a horizontal line. Kinetic energy is the gap, $K = E_{tot} - U$, and it can never be negative. So the charge can only be where the curve is below the line. Where the curve meets the line, K = 0: those are turning points, where the charge stops and reverses.

fixed +2.0 μCfixed +2.0 μCbead +1.0 μCnet force 6.4 N$x = 0$$x = -0.10$ m$x = +0.10$ m$x = 0.05$ mthe force points down the slope of U(x)
A positive bead that can slide along the x-axis between two fixed positive charges. Off center, the nearer charge pushes harder, so the net force points back toward the middle.

Here's an example. Two fixed $+2.0\ \mu$C charges sit at $x = \pm 0.10$ m, and a $+1.0\ \mu$C bead of mass 2.0 g can slide without friction along the x-axis between them. Its potential energy is the sum of its energies with each fixed charge (the fixed pair's own energy is a constant, so it doesn't change any forces):

$$U(x) = kqQ\left(\frac{1}{0.10 - x} + \frac{1}{0.10 + x}\right)$$

-0.1-0.0500.050.100.20.40.60.81$x$ (m)$U$ (J)total energy 0.48 Jturning pointturning pointminimum: stable
The bead's potential energy. The bottom of the well at x = 0 is a stable equilibrium. Released from rest at x = 0.05 m, the bead oscillates between the two turning points.
Pause and think
Look at the graph. If the bead is released from rest at x = 0.05 m, where is it moving fastest, and where does it stop?
I thought about it. Show me
Fastest at $x = 0$, the bottom of the well, where the gap between the total-energy line and U is largest. It stops at $x = \pm 0.05$ m, where the line meets the curve, and oscillates back and forth between them forever (no friction).
Force and speed from U(x)
For the bead above ($q = +1.0\ \mu$C, $m = 2.0$ g, fixed $+2.0\ \mu$C charges at $x = \pm 0.10$ m): (a) Find the force on the bead at $x = 0.050$ m, both from Coulomb's law and from the graph's slope rule. (b) The bead is released from rest at $x = 0.050$ m. Find its speed at $x = 0$.
  1. (a) Coulomb: the left charge is 0.15 m away and pushes $+x$ with $\frac{(9.0 \times 10^9)(1.0 \times 10^{-6})(2.0 \times 10^{-6})}{(0.15)^2} = 0.80$ N. The right charge is 0.050 m away and pushes $-x$ with $\frac{0.018}{(0.050)^2} = 7.2$ N. Net: 6.4 N in $-x$.
  2. Slope rule: $F_x = -\frac{dU}{dx} = -kqQ\left[\frac{1}{(0.10 - x)^2} - \frac{1}{(0.10 + x)^2}\right] = -0.018\left[400 - 44.4\right] = -6.4$ N.
    Why?
    d/dx of 1/(a − x) is +1/(a − x)², and d/dx of 1/(a + x) is −1/(a + x)². Same answer both ways, as it must be.
  3. (b) Energies: $U(0.050) = 0.018\left(\frac{1}{0.050} + \frac{1}{0.15}\right) = 0.48$ J and $U(0) = 0.018\left(\frac{2}{0.10}\right) = 0.36$ J.
  4. $K = 0.48 - 0.36 = 0.12$ J, so $v = \sqrt{\frac{2(0.12)}{0.0020}} = 11$ m/s.

Answer: (a) 6.4 N toward the center ($-x$). (b) About 11 m/s.

Stuck? Get a hint
  1. For (a), find each Coulomb force on the bead and add with signs.
  2. For (b), use energy: K at the center = U at release − U at the center.
  3. v = √(2K/m), with m in kilograms.
?Wait, what's the difference between stable and unstable equilibrium?
Both have zero net force. Stable: a small push creates a force back toward the equilibrium point (a valley in U). Unstable: a small push creates a force away from it (a hilltop in U). A marble in a bowl versus a marble on an upside-down bowl.
Check yourself
On a graph of U(x) for a charge, at a point where the curve slopes upward to the right, which way does the electric force on the charge point?
  1. A+x
  2. B−x
  3. CThere is no force there.
  4. DIt depends on the sign of the charge.
Show the answer

B. $F_x = -dU/dx$, and a positive slope gives a negative force: $-x$, downhill. The sign of the charge is already built into U, so the last choice is a trap.

Exam tip from Mr. T

If a question gives a graph of U against position, it's really asking two things: slope (force) and height (energy). Draw the total-energy line on the graph yourself before answering anything.

  • $F_x = -dU/dx$: the force points downhill on the U(x) graph.
  • Minimum of U: stable equilibrium. Maximum: unstable.
  • $K = E_{tot} - U$. Turning points are where U equals the total energy.
  • Use energy for speeds, slope for forces.