AP Physics C: E&M · Unit 8 lecture · Part 11 of 11 · 8 min

Unit 8 wrap-upPut it together

Mr. Thompkins
That's the whole unit. Let's step back. You now have three ways to find a field, and the skill the exam really tests is choosing the right one.

Integrate (Coulomb, piece by piece)

  • Works for any shape: rods, rings, arcs
  • Start from $dE = k\,dq/r^2$
  • Cancel components by symmetry first
  • Best when the point is on an axis of symmetry

Gauss's law

  • Needs spherical, cylindrical or planar symmetry
  • Start from $\oint\vec E\cdot d\vec A = q_{enc}/\varepsilon_0$
  • Turns into E times an area
  • Best for balls, shells, long lines and big sheets
?Wait, when is a sum of point charges enough?
When you have a few separate charges, just add their fields (or forces) as vectors. Integration is only needed when the charge is spread out continuously.

Three threads tie the unit together. Superposition: forces and fields add as vectors, whether you add three charges or a million pieces with an integral. Symmetry: it tells you which components cancel and which Gaussian surface to draw. Limits: far away, everything looks like a point charge, and at a boundary with no surface charge, E is continuous. Use them to check every answer.

?Wait, which density goes with which shape?
λ (lambda) is charge per length, for rods, wires and arcs. σ (sigma) is charge per area, for sheets, plates and shell surfaces. ρ (rho) is charge per volume, for balls and solid cylinders. The units tell you: C/m, C/m², C/m³.
Pause and think
A long line of charge and a point charge each produce 1000 N/C at 1.0 m. Which produces the stronger field at 3.0 m?
I thought about it. Show me
The line: $1000/3 \approx 333$ N/C, compared with $1000/9 \approx 111$ N/C for the point charge. Lines fall off as 1/r, points as 1/r².

Traps that cost points

✕ Putting signs into Coulomb's law and trusting the sign of the answer for direction.
✓ Use magnitudes for the size. Get the direction from the picture.
✕ Adding the magnitudes of forces or fields that point in different directions.
✓ Add by components. Use symmetry to cancel what you can.
✕ Forgetting that a negative charge feels a force opposite the field.
✓ $\vec F = q\vec E$: the sign of q flips the direction.
✕ Writing Q = λL when λ changes along the rod.
✓ Integrate: $Q = \int\lambda\,dx$.
✕ Measuring the flux angle from the surface.
✓ θ in EA cos θ is measured from the normal.
✕ Counting charge outside the Gaussian surface.
✓ Only enclosed charge counts.
✕ Using Gauss's law on a finite rod or a square.
✓ Without symmetry, Gauss's law is still true but can't give E. Integrate instead.
✕ Saying the field inside a uniform ball is zero.
✓ That's a thin shell or a conductor. Inside a uniform ball, $E = kQr/R^3$.

Key relationships for Unit 8

$F = \frac{1}{4\pi\varepsilon_0}\frac{|q_1q_2|}{r^2}$
Coulomb's lawForce between point charges
$\vec E = \vec F/q_0, \quad \vec F = q\vec E$
Field definitionForce on any charge in a known field
$dE = \frac{k\,dq}{r^2}, \ dq = \lambda\,dx$
Field of a pieceRods, rings, arcs: integrate
$\Phi_E = \int\vec E\cdot d\vec A$
Electric fluxFlat surface: EA cos θ
$\oint\vec E\cdot d\vec A = \frac{q_{enc}}{\varepsilon_0}$
Gauss's lawSpheres, cylinders, planes
$E = \frac{\lambda}{2\pi\varepsilon_0 r}, \ E = \frac{\sigma}{2\varepsilon_0}$
Line and sheetFrom Gauss's law
$E = \frac{kQr}{R^3}$
Inside a uniform ballLinear in r

FRQ strategy for Unit 8

  1. Read the verb. "Derive" means start from a fundamental law (Coulomb's law in dE form, or Gauss's law) and show every step in symbols. "Calculate" means numbers with units. "Justify" means a claim plus the physics reason.
  2. Mathematical Routines: name your Gaussian surface or your dq, write the distance and the surviving component, set limits, and keep symbols until the end.
  3. Translation Between Representations: when you sketch E versus r, mark the boundaries first, then match each region's shape (0, ∝ r, ∝ 1/r, ∝ 1/r²). Curved parts must look curved.
  4. Qualitative/Quantitative Translation: state the comparison (greater, less, equal), then the reason (which charges are closer, what cancels, what's enclosed), then point to your equation.
  5. Experimental Design and Analysis: linearize. If F ∝ 1/r², graph F against 1/r². The slope is the physics.
  6. Check a limit in writing: "far away, this becomes kQ/r², as it should." Graders notice.
Mixed FRQ practice
A thick spherical shell made of insulating material has inner radius $a = 5.0$ cm and outer radius $b = 10.0$ cm. It holds 7.0 nC spread uniformly through its volume. (a) Find E in the hollow center ($r < a$). (b) Derive E for $a < r < b$ in terms of Q, a, b, r and k. (c) Calculate E at r = 7.5 cm and at r = 20 cm. (d) Sketch E against r.
00.050.10.150.20.2501000200030004000500060007000$r$ (m)$E$ (N/C)cavity: 0$kQ/r^2$38006300 at b
  1. (a) A Gaussian sphere with $r < a$ encloses no charge, so $E(4\pi r^2) = 0$ and $E = 0$.
    Why?
    The shell's charge is all outside this surface.
  2. (b) For $a < r < b$, the enclosed charge is the charge between a and r. Uniform density means it's the fraction of the shell's volume: $q_{enc} = Q\frac{r^3 - a^3}{b^3 - a^3}$.
  3. Gauss: $E(4\pi r^2) = \frac{q_{enc}}{\varepsilon_0}$, so $E = \frac{kQ(r^3 - a^3)}{(b^3 - a^3)r^2}$.
    Why?
    Using k = 1/(4πε₀) lets you write the answer in the symbols the question asked for.
  4. (c) At 7.5 cm: $E = \frac{(9.0 \times 10^9)(7.0 \times 10^{-9})(0.075^3 - 0.050^3)}{(0.100^3 - 0.050^3)(0.075)^2} = 3.8 \times 10^3$ N/C.
  5. At 20 cm, all of Q is enclosed: $E = \frac{(9.0 \times 10^9)(7.0 \times 10^{-9})}{(0.20)^2} = 1.6 \times 10^3$ N/C.
  6. (d) Zero up to a, rising (curving) from 0 at a to its peak at b, then falling as $1/r^2$. Continuous at both a and b.
    Why?
    Check: at r = b the formula from (b) gives kQ/b² = 6300 N/C, matching the outside formula.

Answer: (a) 0. (b) $E = \frac{kQ(r^3 - a^3)}{(b^3 - a^3)r^2}$. (c) $3.8 \times 10^3$ N/C and $1.6 \times 10^3$ N/C, radially outward. (d) See the graph.

Stuck? Get a hint
  1. In the hollow, how much charge does a Gaussian sphere enclose?
  2. Between a and b, the enclosed charge is Q times (volume from a to r) / (volume from a to b).
  3. Outside b, the shell acts like a point charge.
Check yourself
A charge of $+2.0\ \mu$C sits at the center of an imaginary cube of side 0.30 m. What is the flux through one face of the cube?
  1. A$3.8 \times 10^4\ \text{N·m}^2/\text{C}$
  2. B$2.3 \times 10^5\ \text{N·m}^2/\text{C}$
  3. C$1.4 \times 10^6\ \text{N·m}^2/\text{C}$
  4. D$2.0 \times 10^5\ \text{N·m}^2/\text{C}$
Show the answer

A. Total flux $= q/\varepsilon_0 = \frac{2.0 \times 10^{-6}}{8.85 \times 10^{-12}} = 2.26 \times 10^5$. By symmetry the six faces share it equally: $3.8 \times 10^4\ \text{N·m}^2/\text{C}$ each. The second choice is the total, not one face.

Check yourself
A rod of length L carries charge Q. At a point on its axis, a distance 100L from its center, which expression best approximates E?
  1. A$kQ/L^2$
  2. B$kQ/(100L)$
  3. C$kQ/(100L)^2$
  4. D$kQL/(100L)^3$
Show the answer

C. Far away, any finite charge distribution looks like a point charge: kQ/r² with r = 100L. The 1/r choice would describe an infinitely long line, not a short rod seen from far away.

Mr. Thompkins
That's Unit 8. Go take the Unit 8 practice set while it's fresh, and when you miss a question, come back to that section and open its recall cards. Next up, Unit 9: potential, where fields become numbers you can simply add.