AP Physics 1 · Unit 7 lecture · Part 6 of 11 · 9 min

7.3 Representing and analyzing SHMReading the three graphs

Mr. Thompkins
Now let's draw the motion. If you can read a position graph and sketch the velocity and acceleration graphs under it, you can answer a huge share of the oscillation questions on the exam without a single formula.

Picture a block released from rest at $x = +A$. At $t = 0$ it sits at the top of the position graph. It moves toward the middle, speeding up, crosses $x = 0$ at a quarter period, reaches $-A$ at half a period, and is back at $+A$ after one full period. Plotted against time, that's a smooth wave: a cosine curve.

Two numbers come straight off a position graph. The amplitude is the height of a peak above the middle line. The period is the time between two neighboring peaks (or any two matching points). For the oscillator below, $A = 0.12\ \text{m}$ and $T = 1.6\ \text{s}$, so $f = \frac{1}{1.6} = 0.625\ \text{Hz}$.

?Wait, how do I get velocity from a position graph?
From Unit 1: velocity is the slope of the position-time graph, and acceleration is the slope of the velocity-time graph. Steep and rising means large positive velocity. A flat spot (a peak or a valley) means velocity zero at that instant.
00.40.81.21.622.42.83.2-0.15-0.1-0.0500.050.10.15t (s)x (m)t = 1.0 s
Position: A = 0.12 m, T = 1.6 s, released from rest at +A.
00.40.81.21.622.42.83.2-0.6-0.4-0.200.20.40.6t (s)v (m/s)t = 1.0 s
Velocity: the slope of the position graph. Zero at the peaks of x, largest (0.47 m/s) where x crosses zero.
00.40.81.21.622.42.83.2-2-1.5-1-0.500.511.52t (s)a (m/s²)t = 1.0 s
Acceleration: the slope of the velocity graph, and always the flipped image of x, because a = −(k/m)x.

Read the velocity graph against the position graph. At every peak or valley of $x$, the curve is flat, so $v = 0$: the block is stopped at an end. Where $x$ crosses zero, the position curve is steepest, so the speed is largest. The velocity graph is the same wave shape, shifted a quarter period.

The acceleration graph is the easiest of all, because $a = -\frac{k}{m}x$. Wherever $x$ is positive, $a$ is negative, and the other way around. The acceleration graph is the position graph flipped upside down (and scaled). It's largest in size at the ends and zero in the middle.

At the ends (x = ±A)

  • Speed zero, for an instant
  • Force and acceleration largest, pointing toward the middle
  • Position graph: a peak or valley
  • All the energy is potential

At equilibrium (x = 0)

  • Speed largest
  • Force and acceleration zero
  • Position graph: crossing the middle line, steepest
  • All the energy is kinetic
?Wait, how can I tell if something is speeding up or slowing down?
Compare the signs of velocity and acceleration. Same sign: speeding up. Opposite signs: slowing down. A block moving toward equilibrium is always speeding up, and a block moving away from it is always slowing down.
Pause and think
The block is at a positive position and moving toward equilibrium. Is it speeding up or slowing down? What are the signs of v and a?
I thought about it. Show me
Speeding up. Moving toward equilibrium from the positive side means $v$ is negative. The restoring force points toward equilibrium, so $a$ is negative too. Same signs: speeding up.
Read the graphs
Use the three graphs above. (a) State the amplitude, period and frequency. (b) At $t = 0.40\ \text{s}$, give the position, the direction of motion, and the acceleration. (c) Do the same at $t = 0.80\ \text{s}$. (d) At $t = 1.0\ \text{s}$ (the orange dots), is the block speeding up or slowing down? Justify with the graphs.
  1. (a) $A = 0.12\ \text{m}$ (peak height), $T = 1.6\ \text{s}$ (peak to peak), $f = \frac{1}{T} = 0.625\ \text{Hz}$.
  2. (b) $t = 0.40\ \text{s}$ is a quarter period. The position graph crosses zero going down, so $x = 0$ and the block is moving in the negative direction at its top speed (the velocity graph is at its minimum, $-0.47\ \text{m/s}$). The acceleration is zero.
    Why?
    Equilibrium crossing: top speed, zero force. Use the slope of x to get the direction: going down means negative velocity.
  3. (c) $t = 0.80\ \text{s}$ is half a period: $x = -0.12\ \text{m}$, the block is momentarily at rest, and the acceleration is at its positive maximum, about $+1.85\ \text{m/s}^2$, pointing back toward the middle.
  4. (d) At $t = 1.0\ \text{s}$, $x \approx -0.085\ \text{m}$. The velocity graph is positive (about $+0.33\ \text{m/s}$) and the acceleration graph is positive (about $+1.3\ \text{m/s}^2$). Same signs, so the block is speeding up, which fits: it's on the negative side heading back toward equilibrium.
    Why?
    A justification cites evidence from the representation: name both signs and say what they mean.

Answer: (a) 0.12 m, 1.6 s, 0.625 Hz. (b) At equilibrium, moving in the negative direction at 0.47 m/s, a = 0. (c) At −0.12 m, at rest, a ≈ +1.85 m/s². (d) Speeding up: v and a are both positive.

Stuck? Get a hint
  1. Find the time on the horizontal axis of each graph and read straight up or down.
  2. For direction of motion, look at the slope of the x graph or the sign of the v graph.
  3. Speeding up when v and a have the same sign.
Check yourself
For the same oscillator, what is true at $t = 1.2\ \text{s}$, three quarters of a period?
  1. A$x = 0$, the speed is largest and the velocity is positive, $a = 0$
  2. B$x = +A$, $v = 0$, $a$ is largest and negative
  3. C$x = 0$, $v = 0$, $a = 0$
  4. D$x = -A$, the speed is largest, $a = 0$
Show the answer

A. At three quarters of a period the block is crossing equilibrium on its way back up from $-A$: $x = 0$, top speed, moving in the positive direction, and zero acceleration. The trap is thinking zero position means zero speed. It's the reverse: zero position means maximum speed.

  • From a position graph: amplitude = peak height, period = peak to peak.
  • Velocity = slope of x: zero at the peaks, largest at the zero crossings, a quarter cycle out of step with x.
  • Acceleration is the flipped image of x, because $a = -\frac{k}{m}x$.
  • Toward equilibrium: speeding up. Away from equilibrium: slowing down.