Unit 6 wrap-upPut it together

| Idea | Equation | Use it when |
|---|---|---|
| Rotational kinetic energy | K = ½Iω² | Anything spinning; add ½Mv² if it also moves |
| Work by a torque | W = τΔθ | A torque acts through an angle; area under τ-θ |
| Angular momentum | L = Iω, L = mvr⊥ | Spinning objects; point masses passing an axis |
| Angular impulse | τΔt = ΔL | A torque acts for a time; area under τ-t |
| Conservation of L | I₁ω₁ = I₂ω₂ | No net external torque on the system |
| Rolling | v = Rω, K = ½Mv² + ½Iω² | Rolling without slipping |
| Orbits | v = √(GM/r), $U_G$ = −GMm/r | Satellites: L and E conserved |
The thread: rotational kinetic energy (6.1) is changed by work done by torques (6.2). Angular momentum (6.3) is changed by angular impulse, and it's conserved when the net external torque is zero (6.4), even when a pin or axle wrecks linear momentum. Rolling (6.5) mixes both kinds of motion through $v = R\omega$. Orbits (6.6) are the grand finale: gravity aims at the center, so angular momentum and mechanical energy both survive.
?Wait, which conservation law do I use when?
I thought about it. Show me
Traps that cost points
Key relationships for Unit 6
FRQ strategy for Unit 6
- Name the system and the axis, then justify every conservation law: "no net external torque about the axle", "static friction does no work".
- Mathematical Routines: write the principle in symbols (Mgh = ½Mv² + ½Iω², or I₁ω₁ = I₂ω₂), add the link (v = Rω), solve in symbols, then substitute.
- Translation Between Representations: energy bar charts must add up, and the area under τ-θ is work while the area under τ-t is angular impulse.
- Qualitative/Quantitative Translation: claim first, then the principle, then what changes and what stays fixed ("L stays the same, I drops, so ω rises").
- Experimental Design: to compare shapes, roll them from the same height and time them, or measure v at the bottom with a photogate; graph v² against h, and the slope is 2g/(1 + β).
- Collision then motion: angular momentum for the collision, energy for the swing or roll afterward.
- (a) The pivot exerts an external force, so linear momentum isn't conserved. But that force has no torque about the pivot, and gravity acts along the vertical through the pivot during the brief collision, so angular momentum about the pivot is conserved.
Why?
The justification for using L instead of p is a scoring point by itself. - Before: $L = mvr_\perp = (0.10)(9.0)(1.2) = 1.08$ kg·m²/s. After: $I = \tfrac13(0.90)(1.2)^2 + (0.10)(1.2)^2 = 0.432 + 0.144 = 0.576$ kg·m², so $\omega = 1.08/0.576 = 1.875$ rad/s, about 1.9 rad/s.
- (b) After the collision, the swing conserves mechanical energy (frictionless pivot). $K = \tfrac12(0.576)(1.875)^2 = 1.01$ J.
Why?
Stage 1 momentum, stage 2 energy, exactly like the ballistic pendulum in Unit 4. - That energy becomes gravitational energy of the rod + clay. The center of mass of the combination is at $\dfrac{(0.90)(0.60) + (0.10)(1.2)}{1.0} = 0.66$ m below the pivot, so $Mgh_{cm} = 1.01$ J gives $h_{cm} = \dfrac{1.01}{(1.0)(9.8)} = 0.10$ m.
Why?
Use the total mass and the combined center of mass. Using the rod alone would miss the clay's gain in height.
Answer: (a) About 1.9 rad/s. (b) The combined center of mass rises about 0.10 m.
Stuck? Get a hint
- Pivot: angular momentum about the pivot, not linear momentum.
- After sticking: $I = \tfrac13M\ell^2 + m\ell^2$.
- Then $\tfrac12I\omega^2 = (M + m)gh_{cm}$.
- AIts angular velocity increases, because its energy is conserved.
- BIts angular velocity decreases, because its rotational inertia increases and its angular momentum is conserved.
- CIts angular momentum decreases, because the panels add drag.
- DNothing changes, because no external force acts.
Show the answer
B. No external torque acts, so $L = I\omega$ is constant. Moving mass outward raises $I$, so $\omega$ drops. Its kinetic energy $L^2/2I$ also drops. In space there's no air drag.
- A0
- B1/3
- C1/2
- D2/3
Show the answer
C. For a hoop $I = MR^2$, so $\tfrac12I\omega^2 = \tfrac12MR^2(v/R)^2 = \tfrac12Mv^2$: rotational and translational are equal, so rotational is half. (A solid cylinder would be 1/3, a solid sphere 2/7.)
