AP Physics 1 · Unit 3 lecture · Part 10 of 10 · 9 min
Unit 3 wrap-upPut it together
Mr. Thompkins
You now have a second way to solve almost any mechanics problem. Forces tell you what happens at each instant; energy tells you how the start connects to the end. On the exam, the hardest part is usually the first line: choosing the system.
Energy
Formula
Belongs to
Zero when
Kinetic
K = ½mv²
One moving object
At rest
Gravitational, near Earth
$\Delta U_g$ = mgΔy
Object + Earth system
Wherever you choose
Gravitational, far away
$U_G$ = −Gm₁m₂/r
Two-mass system
Infinitely far apart
Spring
$U_s$ = ½kx²
Spring (+ attached object)
At rest length
Thermal (internal)
$\Delta E_{th}$ = $f_k$ d
Both rubbing surfaces
Only changes matter
Every form of energy in this unit, who owns it and where its zero is.
?Wait, when should I use energy instead of forces?
Use energy when the question connects two positions or speeds and doesn't ask about time or acceleration, especially on curved paths, ramps, springs and loops. Use forces (Unit 2) when you need an acceleration, a force at one instant, or a time. Many FRQs need both: forces for a condition, energy for the speed.
Here's how the topics connect. Kinetic energy (3.1) is the energy of motion. Work (3.2) is how forces move energy in or out of a system, and the net work on an object equals its change in kinetic energy. Potential energy (3.3) is energy stored inside a system by conservative forces. Conservation of energy (3.4) ties them together, $\Delta E_{sys} = W_{ext}$, with friction converting mechanical energy into thermal energy. Power (3.5) is how fast any of this happens.
Pause and think
A ball is dropped from rest. Using the ball alone as the system, how do you explain its gain in kinetic energy? Using ball + Earth?
I thought about it. Show me
Ball alone: gravity is an external force doing positive work, $W = mgh$, which equals $\Delta K$. Ball + Earth: gravity is internal, and the system's potential energy decreases by $mgh$ while kinetic energy increases by the same amount. Same answer, as long as you don't count gravity twice.
?Wait, what's the difference between work and energy again?
Energy is something a system has: kinetic, potential, thermal. Work is a way energy gets transferred into or out of a system, by an external force acting through a displacement. Both are measured in joules, and the change in a system's energy equals the work done on it from outside.
Traps that cost points
✕ Counting gravity twice: as work and as potential energy in the same equation.
✓ Earth in the system: use $U_g$. Earth outside: use the work done by gravity. Never both.
✕ Giving kinetic energy a direction or a negative value.
✓ Energy is a scalar; K is never negative.
✕ Using the distance along a ramp in mgh.
✓ Only the vertical height change counts.
✕ Doubling compression and expecting double spring energy.
✓ $U_s$ ∝ x²: twice the compression, four times the energy.
✕ Using ½m(Δv)² for a change in kinetic energy.
✓ ΔK = ½mv_f² − ½mv_i²: difference of squares.
✕ Saying the normal force does work on a curved frictionless track.
✓ It is perpendicular to the motion: zero work.
✕ Saying energy is lost to friction.
✓ It becomes thermal energy; the total is conserved.
✕ Writing that an object has potential energy.
✓ Potential energy belongs to a system: object + Earth, object + spring.
✕ Answering a power question in joules.
✓ Power is energy per time: watts.
Key relationships for Unit 3
$K = \tfrac12 mv^2$
Translational kinetic energyAny moving object
$W = Fd\cos\theta = F_\parallel d$
Work by a constant forceArea under F vs x for a changing force
$W_{net} = \Delta K$
Work-energy theoremNet work on one object
$\Delta U_g = mg\Delta y$
Gravitational PE near EarthObject-Earth system, g about constant
$U_G = -\frac{Gm_1 m_2}{r}$
Gravitational PE, any distanceSatellites, planets; zero at infinity
$U_s = \tfrac12 kx^2$
Spring PEx from the rest length
$\Delta E_{sys} = W_{ext}$
Conservation of energyAny system; $W_{ext}$ = 0 means $E_{sys}$ is constant
$\Delta E_{th} = f_k d$
Thermal energy from kinetic frictionSurfaces inside the system
$P = \frac{\Delta E}{\Delta t},\ \ P = Fv\cos\theta$
PowerRate of energy transfer, in watts
FRQ strategy for Unit 3
Write "System: ..." first, and say whether any external force does work on it and why ("the normal force is perpendicular to the motion").
Bar charts: one bar per energy form, at each moment the question names, with heights consistent with each other and with your equation. Label zero bars clearly.
Derivations: start from $\Delta E_{sys}$ = $W_{ext}$ or $K_i$ + $U_i$ = $K_f$ + $U_f$ in symbols, substitute each energy term, and simplify before plugging in.
Combine with forces when a condition appears: "just barely makes it over", "loses contact", "maximum speed without slipping".
Paragraphs: claim, then the energy principle and the specific energy changes, then link to your expression ("according to my equation, the speed does not depend on m, so ...").
Experiments: choose measurements that give a linear graph, for example launch height against compression squared for a spring, so the slope gives k or another constant.
Bar charts in joules for the final problem, system block + Earth + spring + rough patch: released from 1.5 m, then at maximum compression.
Mixed FRQ practice
A 2.0 kg block is released from rest 1.5 m up a frictionless curved ramp. At the bottom it crosses a 0.80 m rough patch ($\mu_k = 0.25$) on level ground, then compresses a spring ($k = 500$ N/m) on frictionless ground. (a) Find the block's speed at the bottom of the ramp. (b) Find the thermal energy produced on the patch. (c) Find the maximum compression of the spring. (d) A 4.0 kg block of the same material is released from the same height. Does the maximum compression increase, decrease or stay the same? Justify with an expression.
(a) System: block + Earth, frictionless ramp, normal force perpendicular to motion: $mgh = \frac12 mv^2$, so $v = \sqrt{2gh} = \sqrt{2(9.8)(1.5)} = 5.42$ m/s.
(b) $\Delta E_{th} = f_k d = \mu_k mgd = (0.25)(2.0)(9.8)(0.80) = 3.92$ J.
Why?
Level ground, so the normal force on the patch equals mg.
(c) System: block + Earth + spring + patch, no external work: $mgh = \Delta E_{th} + \frac12 kx^2$. So $29.4 = 3.92 + \frac12(500)x^2$, giving $x = \sqrt{\frac{2(25.48)}{500}} = 0.319$ m.
Why?
Go straight from release to maximum compression, where the block is momentarily at rest.
(d) In symbols: $mgh - \mu_k mgd = \frac12 kx^2$, so $x = \sqrt{\frac{2mg(h - \mu_k d)}{k}}$. $x$ is proportional to $\sqrt m$, so it increases (by $\sqrt2$, to 0.451 m).
Why?
Claim, expression, link. The heavier block loses more energy on the patch, but it starts with proportionally more, and the spring constant does not change, so the spring must compress farther to store it.
Answer: (a) 5.42 m/s. (b) 3.92 J. (c) 0.319 m. (d) Increases: $x = \sqrt{2mg(h - \mu_k d)/k}$ grows with $\sqrt m$.
Stuck? Get a hint
Ramp: frictionless, so mgh becomes ½mv².
Patch: thermal energy is μk m g d.
Spring: what is left after the patch becomes ½kx². For (d), keep m as a symbol and see where it ends up.
Check yourself
A pendulum bob swings from its highest point down through its lowest point. Air resistance is negligible. For the bob-Earth system, which is true at the lowest point?
AKinetic energy is zero and potential energy is maximum.
BKinetic energy is maximum and the total mechanical energy is the same as at the highest point.
CThe total mechanical energy is greater than at the highest point.
DThe tension in the string has done positive work on the bob.
Show the answer
B. Height is lowest, so $U_g$ is smallest and K is largest. With no air resistance and tension always perpendicular to the motion (no work), mechanical energy is conserved. Choice D forgets that tension is perpendicular to the velocity.
Check yourself
A 1500 kg car accelerates from rest to 20 m/s in 10 s on level road. Ignoring friction and drag, what average power does the engine deliver?
A3,000 W
B30,000 W
C60,000 W
D300,000 W
Show the answer
B. $\Delta K = \frac12(1500)(20)^2 = 300{,}000$ J, and $P = \frac{300{,}000\ \text{J}}{10\ \text{s}} = 30{,}000$ W. Choice D is the energy in joules, not the power.
Mr. Thompkins
That's Unit 3. Take the Unit 3 quiz, and draw a bar chart for every problem even when nobody asks: it's the fastest way to catch a missing energy. When you miss one, come back to that section's recall cards. Next stop, Unit 4: momentum, the other quantity that never disappears.