AP Physics 1 · Unit 1 lecture · Part 2 of 10 · 8 min

1.2 Displacement, velocity, and accelerationHow fast, and which way: velocity

Mr. Thompkins
Speed is the number on a car's speedometer. Velocity is that number plus a direction. The difference sounds tiny, but it's behind half the trick questions in this unit, so let's nail it.

Average velocity is displacement divided by the time it took: $\bar v = \frac{\Delta x}{\Delta t}$. Its unit is meters per second, m/s. Because displacement is a vector, average velocity is a vector too, and it points the same way as the displacement. Average speed is the scalar version: total distance divided by time.

?Wait, what's a slope again?
The slope of a straight line is rise over run: how much the vertical value changes divided by how much the horizontal value changes, $\frac{\Delta y}{\Delta x}$. A line going up to the right has a positive slope, a flat line has zero slope, and a line going down has a negative slope.

Here's why slope matters. On a position-time graph, the rise is $\Delta x$ and the run is $\Delta t$. So the slope of a position-time graph is $\frac{\Delta x}{\Delta t}$, the velocity. A steeper line means faster motion. A flat line means the object is sitting still. A line sloping down means it's moving in the negative direction.

024681003691215t (s)x (m)slope +3 m/sslope 0slope −3 m/s
A jogger runs 12 m out in 4 s, rests for 2 s, then jogs back to the start in 4 s. Each straight piece has a constant slope, so a constant velocity.
Pause and think
For the jogger's whole 10 s trip, what's the average velocity? What's the average speed? Predict before you read on.
I thought about it. Show me
Average velocity is zero: the jogger ends at $x = 0$, where she started, so $\Delta x = 0$. Average speed is not zero: she covered 12 m out and 12 m back, 24 m in 10 s, so 2.4 m/s.

Instantaneous velocity is the velocity at one moment, what a speedometer with a direction would show. When a position graph is curved, the velocity keeps changing. To find it at one instant, draw the tangent line: the straight line that just touches the curve at that point and matches its steepness there. The slope of the tangent is the instantaneous velocity. Speed is the size of the instantaneous velocity, so a velocity of $-5$ m/s means a speed of 5 m/s.

0123456048121620t (s)x (m)curve: speeding upsecant: average vtangent at 4 s
For x = 0.5t², the secant from 2 s to 6 s (orange) gives the average velocity over that interval. The tangent at 4 s (red) gives the instantaneous velocity at that moment.

Look closely at that graph. The secant line connects two points on the curve, so its slope is the average velocity between them: $\frac{18 - 2}{6 - 2} = 4.0$ m/s. The tangent at $t = 4$ s has the same slope, 4.0 m/s. That's not luck. When the acceleration is constant, the average velocity over an interval equals the instantaneous velocity at the middle of that interval. You'll use that idea in Section 5.

?Wait, why is a curved position graph a sign of changing velocity?
Velocity is the slope. A straight line has the same slope everywhere, so the velocity is constant. A curve has a different slope at each point, so the velocity is changing. If the curve gets steeper as time goes on, the object is speeding up.
Read a position-time graph
Use the jogger's graph. Find (a) her velocity from 0 to 4 s, (b) her velocity from 6 to 10 s, (c) her average velocity and average speed for the whole trip.
024681003691215t (s)x (m)slope +3 m/sslope 0slope −3 m/s
  1. (a) Slope from 0 to 4 s: $\frac{12 - 0}{4 - 0} = +3.0$ m/s.
    Why?
    On a position graph, slope = velocity. Read two points on the same straight piece.
  2. (b) Slope from 6 to 10 s: $\frac{0 - 12}{10 - 6} = -3.0$ m/s. Negative means she's moving back toward the origin.
    Why?
    The speed is 3.0 m/s both ways. Only the sign, the direction, changes.
  3. (c) Whole trip: $\Delta x = 0 - 0 = 0$, so $\bar v = \frac{0}{10\ \text{s}} = 0$. Distance is $12 + 12 = 24$ m, so average speed $= \frac{24\ \text{m}}{10\ \text{s}} = 2.4$ m/s.
    Why?
    The 2 s of rest still count in the total time. Students often divide by 8 s by mistake.

Answer: (a) $+3.0$ m/s. (b) $-3.0$ m/s. (c) Average velocity 0; average speed 2.4 m/s.

Stuck? Get a hint
  1. Slope is rise over run: change in x divided by change in t.
  2. For the whole trip, where does she end compared with where she started?
  3. Average speed uses the total distance, 24 m, and the total time, 10 s, including the rest.
Check yourself
A position-time graph for a toy car is a straight line sloping downward. What does that tell you about the car?
  1. AIt is slowing down.
  2. BIt moves in the negative direction at constant velocity.
  3. CIt is at rest.
  4. DIt is speeding up in the negative direction.
Show the answer

B. A straight line has one constant slope, so the velocity is constant. Sloping down means that slope, the velocity, is negative. The first choice is the classic trap: a downward line on a position graph says nothing about slowing down.

Exam tip from Mr. T

When a question says "average velocity", reach for displacement. When it says "average speed", reach for total distance. Same time in the bottom of both fractions.

  • Average velocity $\bar v = \frac{\Delta x}{\Delta t}$: a vector, same direction as the displacement. Average speed = distance / time: a scalar.
  • The slope of a position-time graph is the velocity. Straight line: constant velocity. Curve: changing velocity.
  • Instantaneous velocity is the slope of the tangent line at that moment. Speed is its size.
  • A round trip has zero average velocity but a nonzero average speed.