AP Biology · Unit 2 lecture · Part 8 of 12 · 10 min

2.7 Tonicity and osmoregulation: water potentialWater potential, step by step

Mrs. Otero
Water potential is the calculation students fear most in this unit, and it's honestly just two formulas and one rule. The formulas are on the sheet you get on exam day. Let's make them friendly.

Water potential, Ψ (the Greek letter psi), measures how much water "wants" to move out of a place. The rule is the whole game: water moves from higher water potential to lower water potential. Pure water in an open container is the reference point, Ψ = 0. Anything that makes water less free to move lowers Ψ below zero.

The formula sheet gives Ψ = Ψp + Ψs. Ψp is the pressure potential: pressure pushing on the water raises water potential. In an open beaker, Ψp = 0. Inside a turgid plant cell, the wall pushes back on the swollen cell, so Ψp is positive. Ψs is the solute potential: solutes tie up water molecules, so adding solute lowers water potential. Ψs is zero for pure water and negative for any solution.

Water potential on the formula sheet

$\Psi = \Psi_P + \Psi_S$
Water potential = pressure potential + solute potentialWater moves from higher Ψ to lower Ψ
$\Psi_S = -iCRT$
Solute potential of a solutionAlways zero or negative
$i$
Ionization constant: particles per formula unit1.0 for sucrose or glucose, about 2.0 for NaCl
$R = 0.0831\ \text{L·bar/(mol·K)}$
Pressure constantGiven on the sheet
$T = {}^\circ\text{C} + 273$
Temperature in kelvinConvert before you multiply
?Wait, what's molarity?
Molarity (M) is moles of solute per liter of solution. A 0.40 M sucrose solution has 0.40 moles of sucrose dissolved in each liter. In −iCRT, C is the molarity.
?Wait, why is i about 2 for salt?
NaCl breaks apart in water into two particles, Na⁺ and Cl⁻. Solute potential depends on the number of dissolved particles, so 1 mole of NaCl acts like 2 moles of particles. Sucrose and glucose stay in one piece, so i = 1.
Calculate and predict (formula sheet)
A plant cell has Ψp = +2.0 bars and Ψs = −7.0 bars. It is placed in an open beaker of 0.40 M sucrose at 20 °C. (a) Calculate the water potential of the cell. (b) Calculate the water potential of the solution. (c) Predict the direction of net water movement and what happens to the cell.
  1. (a) Ψcell = Ψp + Ψs = (+2.0) + (−7.0) = −5.0 bars.
    Why?
    Pressure raises Ψ, solute lowers it. Add them with their signs.
  2. (b) Convert temperature: T = 20 + 273 = 293 K. Sucrose doesn't ionize, so i = 1.0.
    Why?
    Using °C instead of kelvin is the most common way to lose this point.
  3. $\Psi_S = -iCRT = -(1.0)(0.40)(0.0831)(293) = -9.74$ bars. Open beaker, so $\Psi_P = 0$ and $\Psi_{solution} = -9.74$ bars.
    Why?
    Keep the negative sign. Solute potential is never positive.
  4. (c) Compare: the cell is at −5.0 bars and the solution at −9.74 bars. −5.0 is higher, so net water moves out of the cell into the solution.
    Why?
    Water moves from higher (less negative) to lower (more negative) water potential.
  5. The cell loses water, its turgor pressure drops, and it may plasmolyze. It loses mass.
    Why?
    Finish with the biological consequence, not just "water moves out".

Answer: (a) −5.0 bars. (b) −9.74 bars. (c) Water moves out of the cell, so the cell loses turgor and mass and may plasmolyze.

Stuck? Get a hint
  1. Add Ψp and Ψs for the cell.
  2. For the solution: i = 1, C = 0.40, R = 0.0831, T = 293 K, and don't forget the minus sign.
  3. Which number is higher (less negative)? Water flows away from it.
Pause and think
A student says, "−9.74 is a bigger number than −5.0, so water moves toward the cell." Find the error.
I thought about it. Show me
With negative numbers, −9.74 is lower than −5.0, not higher. Water moves to the lower (more negative) water potential, so it moves toward the solution, out of the cell. When in doubt, think: more solute means more negative means water flows there.

Finding a tissue's water potential from data

The classic lab: soak equal cores of potato in a range of sucrose solutions, weigh them before and after, and graph the percent change in mass. Cores gain mass in dilute solutions (water in) and lose mass in concentrated ones (water out). Where the line crosses zero, the solution matches the potato: no net water movement, so the two water potentials are equal.

?Wait, how do I find percent change?
Percent change = (final − initial) ÷ initial × 100. A core that goes from 4.00 g to 4.36 g changed by (4.36 − 4.00) ÷ 4.00 × 100 = +9%. Labs use percent change because the cores start at slightly different masses.
00.20.40.60.81-25-20-15-10-50510152025sucrose concentration (M)% change in massno change: 0.35 M
Invented data for potato cores after 24 hours. The line crosses 0% between 0.2 M and 0.4 M; reading it, no change happens at about 0.35 M.
Read the graph, then calculate
Use the graph (room temperature 22 °C). (a) Estimate the sucrose concentration at which the cores neither gain nor lose mass. (b) Calculate the water potential of the potato cells. (c) Predict whether a core gains or loses mass in 0.10 M NaCl at 22 °C.
  1. (a) The line crosses 0% at about 0.35 M.
    Why?
    Between 0.2 M (+9%) and 0.4 M (−3%) the change is 12 points; 9 of those 12 points are used up by 0.35 M: 0.2 + 0.2 × (9 ÷ 12) = 0.35.
  2. (b) At that point the potato and the solution have equal water potential. $T = 22 + 273 = 295$ K. $\Psi = \Psi_S = -(1.0)(0.35)(0.0831)(295) = -8.58$ bars.
    Why?
    No net movement means equal water potential, and the open beaker has Ψp = 0.
  3. (c) For 0.10 M NaCl, $i = 2$: $\Psi_S = -(2)(0.10)(0.0831)(295) = -4.90$ bars.
    Why?
    Salt splits into two ions, so double the particles.
  4. The solution (−4.90 bars) has a higher water potential than the potato (−8.58 bars), so water moves into the core and it gains mass.
    Why?
    Compare, then state direction and outcome.

Answer: (a) About 0.35 M. (b) About −8.58 bars. (c) The core gains mass, because 0.10 M NaCl is at −4.90 bars, higher than the potato.

Stuck? Get a hint
  1. Find where the line crosses the x-axis.
  2. At that concentration, Ψpotato = Ψsolution = −iCRT with T in kelvin.
  3. For NaCl, use i = 2, then compare the two water potentials.
Check yourself
What is the solute potential of a 0.20 M glucose solution at 25 °C? (R = 0.0831 L·bar/(mol·K))
  1. A−0.42 bars
  2. B−4.95 bars
  3. C−9.91 bars
  4. D+4.95 bars
Show the answer

B. T = 25 + 273 = 298 K, i = 1 for glucose: Ψs = −(1)(0.20)(0.0831)(298) = −4.95 bars. −9.91 doubles it by using i = 2, which is only right for salts. −0.42 comes from using 25 °C instead of kelvin, and a positive value drops the minus sign.

Exam tip from Mrs. O

Do every water potential problem in the same four lines: convert to kelvin, choose i, plug into −iCRT, then compare and say which way water moves. A correct number with no direction usually earns only half the credit.

  • Water moves from higher water potential to lower (more negative) water potential.
  • Ψ = Ψp + Ψs. Pressure raises Ψ; solute lowers it. In an open container Ψp = 0.
  • Ψs = −iCRT: i = 1 for sucrose and glucose, about 2 for NaCl; T in kelvin; R = 0.0831.
  • In a mass-change graph, the x-intercept is where the tissue's water potential equals the solution's.